Peanut Butter Butterscotch Fudge Recipe (2024)

FAQs

What causes peanut butter fudge not to harden? ›

Peanut butter fudge may fail to harden if it hasn't been refrigerated long enough or if not enough powdered sugar was used. Ensure that you follow the recommended refrigeration time and accurately measure the powdered sugar to achieve the perfect consistency.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

If the sugar crystals are not properly dissolved before cooling, they can create a gritty texture. To avoid this, ensure that you stir the fudge mixture consistently and remove any sugar crystals that form on the sides of the pan using a wet pastry brush.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

You should mix the cream, butter, and sugar when making your fudge, but put down the spoon once it has reached its boiling point. Stirring while your sugar mixture is boiling will only form sugar crystals and make your fudge crunchy rather than silky smooth.

Fudge can turn into caramel due to overcooking or undercooking, incorrect temperatures, or wrong ingredients.

Undercooked. This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft.

If you are using an electric whisk instead of hand beating your Homemade Fudge it's important to remember that this is a very easy way to overbeat Fudge. When Fudge is overbeaten it can also create a grainier texture on the tongue, so be extra careful when using electric equipment to beat your Homemade Fudge!

OPTION 4) If you think the reason it didn't set was because you didn't heat it to the right temperature, you could try putting it back into the pan and re-cooking.

Why shouldn't you stir fudge after it reaches the correct temperature? ›

Avoid crystallization

During cooking, sugar crystals can stick to the sides of the pan. If you stir the mixture, these crystals could fall in and crystallize a part of the sugar again.

Humidity can cause fudge to boil over in the pan or stay soft when set, so try to avoid working on humid days if at all possible. If waiting for a less humid day isn't feasible, you'll need to boil your fudge at a slightly higher temperature than usual — or just order some delicious fudge from Wockenfuss!

The ratio of chocolate to condensed milk needs to be just right, otherwise you might end up with fudge that is too soft or too hard. Do not freeze the fudge to set it. Best way is to just be patient for a couple hours and set it in the fridge. If your fudge hasn't set, then you've gone wrong somewhere else.

Why is my fudge not setting? It sounds like your fudge simply wasn't heated enough. ... If it's overcooked (resulting in grainy fudge) or undercooked (resulting in poor setting) all you really need to do is add a bit of cream, reheat the fudge to the target temperature, and let it set again.

This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool. Heat in 30-second bursts in the microwave, stirring well between each to ensure everything is melting evenly.

Let the fudge rest at room temperature for 15 minutes before placing in the refrigerator, uncovered. Refrigerate until the fudge is firm, about 2-3 hours (or overnight), before slicing and serving.